Thanksgiving Becomes More Union-Made: Seneca Foods Workers Join the IAMAW

Thanksgiving Becomes More Union-Made: Seneca Foods Workers Join the IAMAW

Recently, more than 193 seasonal employees at Seneca Foods vegetable processing facility in Leicester, NY voted to join the IAM. This organizing campaign accomplished something relatively unheard of, filing for an election with just 30 percent of the workforce signing representation cards and then overwhelmingly winning the election.

“On behalf of the Eastern Territory, I would like to congratulate and welcome the women and men from Seneca into the IAM family,” said Eastern Territory General Vice President Jimmy Conigliaro Sr. “This was a great team effort. Thank you to Chief of Staff Juan Negron, Grand Lodge Representative Chuck Herod, Directing Business Representative Ron Warner and IAM District 65 for your dedication and relentless work in bringing this organizing campaign to fruition.”

The seasonal processing schedule typically runs from July 1 through the end of November. Many of these seasonal employees are from Puerto Rico and have traveled back and forth to Seneca Foods for years. Working conditions were not favorable and employees were required to work twelve-hour days, seven days a week.

“These employees have seen the disparity of how they are treated compared with how fulltime workers in the facility are treated and compensated under a Collective Bargaining Agreement,” said District 65 Directing Business Representative Ron Warner. “They know we can make a difference and that is why they voted for the IAM. Since the majority of the workers spoke only Spanish, I’d also like to give special thanks to Chief of Staff Juan Negron and Chief Steward Luis Diaz who were integral in communicating with our new sisters and brothers.”

IAM Local Lodge 1580 currently represents 40 fulltime employees at the Seneca Foods facility. In September, seasonal employees, who handle all the processing including canning of the vegetables, contacted Local Lodge 1580 Chief Steward Luis Diaz expressing a strong desire to join the IAM.  

 

Looking for more Union Made Thanksgiving Products?

    RELATED ARTICLES

IAMAW International President Robert Martinez Talks Election, Unity on LCLAA Podcast

IAMAW International President Robert Martinez Talks Election, Unity on LCLAA Podcast

IAM International President Robert Martinez Jr. recently joined the Labor Council for Latin American Advancement (LCLAA) podcast “El Desvio, Many Roads, one Destination.”

Martinez discusses the recent presidential election, COVID-19, and how organizations like the IAM and LCLAA play a critical role in bringing our divided nation back together.

“I am so proud of all of our members and every American for going to the polls in record numbers,” said Martinez. “Despite a pandemic and deliberate attempts to suppress our vote, more Americans voted in this election than any in American history. That is a testament to the labor movement and organizations like LCLAA who have mobilized to turn out the vote, and now count every vote.”

Listen to the entire episode here. >>

    RELATED ARTICLES

Managing Pandemic Stress in a Healthy Way: EAP Director, Bryan Hutchinson

Managing Pandemic Stress in a Healthy Way: EAP Director, Bryan Hutchinson

141 Report: Employee Assistance Director, Bryan Hutchinson

The pandemic has hit airline workers particularly hard, creating a climate of job insecurity, isolation and the potential for addiction. This week, IAMAW District 141 EAP Director Bryan Hutchinson sits down with Dave for a conversation about how to deal with pandemic stress among airline workers.

Struggling? Help Can Happen Now.

The District 141 EAP offers free, confidential, and compassionate help to Machinists and Aerospace Union members at times of crisis or when they face personal challenges. The EAP also evaluates treatment options for addiction and mental health issues and helps members prepare for life changes in a positive and healthy way.

     Related Stories

Alabama Aerospace Members Make Big Gains with New Contract

Alabama Aerospace Members Make Big Gains with New Contract

 Nearly 120 members of IAM Local 2766 overwhelmingly ratified a new contract with Tyonek Services Group. The aerospace workers who maintain helicopters at Redstone Arsenal in Alabama have seen significant improvements in compensation since joining the IAM in 2017.

The new four-year deal includes the following improvements:

  • Three percent wage increase in each year of the contract
  • Significant reduction in cost of medical insurance coverage
  • Immediate wage equity adjustments for Electronic Techs and Machinists
  • Bonus for all employees with A&P licenses
  • Accelerated vacation schedule allowing employees to earn vacation sooner
  • Increased holidays
  • Improved Temporary Duty Travel (TDY) language.

“Congrats to Local 2766 and all involved for an outstanding collective bargaining agreement,” said IAM Aerospace General Vice President Mark Blondin. “The IAM continues to be the leader in the aerospace industry, especially when it comes to work under the Service Contract Act. This contract is just one of many that the IAM has negotiated under the SCA, and we continue to secure superior wages and benefits for our members and their families.”

“These negotiations were special for me because I helped organize this group along with retired District 75 organizer Mike Cooke,” said IAM Aerospace Coordinator Tony Wirth. “I was also there with them when we negotiated their first contract, so to be able to be there for this one has given me an opportunity to be a part of their success from the beginning. Congratulations to BR Matt Griggs and the committee for a great contract.”

“With the commitment and dedication of Business Representative Matt Griggs, the Negotiation Committee was well prepared and ready to negotiate a great contract,” said District 75 President/Directing Business Representative Stephen P. Jordan. “A big thank you goes out to Aerospace Coordinator Tony Wirth for helping to achieve this great contract, this was a team effort for sure.”   

The group negotiated their first contract with Tyonek, who won the maintenance contract previously held by Y-Tech. The negotiating committee consisting of Local 2766 President Tom Lewis, Committeeman Dan Gross, Committeeman Ryan Petosky, IAM Aerospace Coordinator Tony Wirth, District 75 Business Representative Matt Griggs worked extensively preparing for the negotiations with the new company.

 

 

    RELATED ARTICLES

Here’s How to Unionize Your Workplace

Here’s How to Unionize Your Workplace

Laying the groundwork for Unionizing your workplace

Federal law says that if most employees in a workplace want to join a Union, all they have to do is sign a petition telling Federal regulators that they want to unionize and then put the matter up to a vote. That’s it. 

So, here’s what you need to do, according to Frank Giannola (he’s a veteran Organizer at the International Association of Machinists & Aerospace Workers, the largest group of airline and aviation workers in the world). 

Step One: Draw up the borders of your workgroup 

Federal rules require that employees who do the same job all belong to the same “bargaining unit.” “So, a typical airline workplace would include everyone who can work in the same area, for example, the ramp, bag chute, and bag runners. Another airline workgroup might consist of a much smaller set of employees, such as Customer Service and Clerical Employees,” according to Giannola. 

Step Two: Evaluate Interest. 

Without attracting management’s attention, can you determine how many of your coworkers might sign a union petition and vote to join? “If you decide that most of your coworkers are on board, you and your coworkers will be able to vote sooner rather than later,” Giannola says. “If you think you’re going to need to convince them on the idea, it might take a little longer.” 

    Contact a Union Organizer

    Want to find out how to bring a union into your workplace? Talk to an expert right now. 

    Step Three: Find People Willing to Serve on a Committee

    The most crucial part of organizing is, well, organizing. Having an inside committee that can hold regular meetings and authoritatively make decisions is critical to demonstrate that your workplace is serious about getting organized. According to Frank Giannola, this is perhaps the single most crucial thing that will determine how much a union will invest in organizing a workplace. This committee should represent a broad cross-section at your job. 

    Once you have a good idea of how much union support exists within your clearly-defined workplace and have an organizing committee ready to get your group connected to a union, you’re prepared to have a chat with a union organizer. 

    Talking to a Union Organizer

    When you call the IAMAW District 141 Organizing Department, you’ll talk to an expert on union organizing who can explain how everything works and help you develop a plan for your specific group. 

    Expect to talk about the logistics of your workplace, such as how many people work there, some of the main concerns people have, and general things such as how a union can improve working conditions. Safety issues, pay and benefits, and other granular data are very valuable at this stage. It’s key that you and other organizers can speak authoritatively and clearly about the work you do, and what you need.

    Typically, Union Organizers will want to keep the effort low-key at first. Unions and companies are not enemies since both employees and employers are interested in creating a successful business that provides good jobs and wages. Even though unions can add great workplace benefits that will draw top talent to a company, many employers do not want to share power with employees. This can create friction, and it’s usually best to avoid conflict. 

    Your Organizing Committee members should spend the next few weeks building support and getting a list of people willing to sign the petition. The petition itself is simple. It’s done by asking coworkers to sign unique cards that authorize a union vote. These cards expire in one year, so it’s essential to know who will sign them beforehand. That way, they can all be signed and turned in at once. 

    This sounds simple, but it can be a lot of work, and the company is likely to do things that it shouldn’t in order to throw a wrench into the whole thing. To make the process a little easier, it’s usually a good idea to set up social media and text groups with apps like WhatsApp or Facebook Messenger. You can also ask your Union Organizers to create special Machinists & Aerospace Union websites and online forums to allow people to talk to each other outside the auspices of management. 

    Card Week!

    When everything’s ready, unleash the petition! When everyone is signing their Authorization Cards, remember to gather everything up fast. Meet up with signors outside of work if you have to. Try not to take more than two weeks to complete all the card signings – or even less, if possible. According to Giannola, If everyone doesn’t get a chance to sign an authorization card, that’s ok; “just as long as a majority of coworkers authorize the union vote.” Speed is key.

    Union Organizers can assist during this process – just let them know what you need. They can provide things like meeting places, flyers, and online materials. They can also help with things like campaign supplies, informational handouts, and they can obtain permits from local authorities if needed. Union Organizers are there to help, support, and guide you through the process, so communicate with them often.

    Getting those Authorization Cards signed quickly is critical to a successful campaign. Companies will try to talk your coworkers out of unionizing. Expect meetings to ask for “one more chance” to keep the “direct relationship” with you. Expect a few scare tactics about the horrors of paying union dues. “You never think about paying dues,” Frank says. “It’s just another paycheck deduction that union workers don’t even notice. What you’ll be paying attention to is the fact that you won’t ever have to worry about doing your job right, working hard 40 hours a week, and suddenly getting fired without warning,” he said. “That’s what you’ll notice. You’ll notice that you’re getting more money every payday,” he continued. 

    After more than half of your coworkers sign Authorization Cards, a union vote becomes a legal requirement at your workplace, no matter what managers think about it. 

    A union vote is normally scheduled for a month after the authorization cards are certified by the Federal Government. Typically, they are conducted over the phone. Once that’s done, congratulations! You and your coworkers are now Union members who can negotiate in force, collectively, for things like better wages, benefits, and agree on rules that will govern how you will be disciplined, among many other things. 

    Milwaukee Art Museum Workers Overwhelmingly Vote to Join Machinists Union!

    Milwaukee Art Museum Workers Overwhelmingly Vote to Join Machinists Union!

    MILWAUKEE, Nov. 13, 2020 – A group of 141 employees of the Milwaukee Art Museum (MAM) voted by 72 percent to join the International Association of Machinists and Aerospace Workers (IAMAW). The vote was held over a three-week period via mail with the ballots tallied today. 

    The new Machinists Union members work in every capacity at the Milwaukee Art Museum including Visitor Services, Food and Beverage, Education & Programs, Information Systems, Facilities and more.

    “I’m proud to welcome Milwaukee Art Museum workers to the IAM,” said IAM District 10 Directing Business Representative Alex Hoekstra. “Your solidarity through challenging and uncertain times is truly inspiring. Together we will affect real change at work.”

    “MAM workers overcame a year of tremendous obstacles to achieve this victory and claim their seat at the table,” said IAM District 10 Organizer Anne Wiberg. “The hard work and unwavering solidarity of the organizing team made this historic wall-to-wall union possible.”

    “I want to welcome these members to the Machinists Union family,” said IAM Midwest Territory General Vice President Steve Galloway. “I’m so proud of them for educating themselves about the benefits of the IAM and working so hard for union representation and a voice in their workplace. Unions aren’t just for manufacturing workers, they have a place in every working environment.”

    Mail ballots were sent out to eligible MAM staff Monday, Oct. 19 and were returned to the National Labor Relations Board Region 18 Office by Nov. 9 at 4:30 p.m. The final vote count was today, Friday, Nov. 13.

    The International Association of Machinists and Aerospace Workers (IAM) is among the largest industrial trade unions in North America and represents nearly 600,000 active and retired members in the manufacturing, aerospace, defense, airlines, transportation, shipbuilding, woodworking, health care, and other industries.

    goIAM.org | @MachinistsUnion

        RELATED ARTICLES